I try to install openbsd with ubuntu live cd on alix6e1 board ( cf card 4gb).
After all the installation process and install sets by default.
I am rebooting the board and remove the possibility of pxeboot from the bios Options.
Board recognizes the cf card and tries to boot from hd0 while in the installation process he just recognize
only wd0 and install everything in wd0.
In any case when the board is after the installation process, is not detecting the installation drive.
01F0 Master 044A CF CARD 4GB
Phys C/H/S 1966/16/63 Log C/H/S 983/32/63
Using drive 0, partition 3;
probing: pc0 com0 pci mem[640K 255M a20=on]
>> OpenBSD/i386 BOOT 3.01
booting hd0a:/bsd: 5665588+872060 [52+291168+272312]=0x6c5c70
entry point at 0x200120
Can someone give me a hint.
I assume you are connecting to the board via a serial cable. If so, you are probably wanting to change system output to a serial console rather than the default (keyboard & monitor). Serial consoles are enabled during installation by answering "yes" to the displayed question:
Change the default console to com0? [no]
More information & context on the installation process can be found in Section 4.5.2 of the FAQ.
|Thread||Thread Starter||Forum||Replies||Last Post|
|OpenOffice proposed as Apache project||J65nko||News||5||5th June 2011 06:32 AM|
|FreeBSD Foundation Project Announcement||J65nko||News||0||3rd December 2010 08:02 PM|
|Need suggestions on what to name this project||TerryP||Off-Topic||10||6th November 2010 02:13 PM|
|C project to study||maxrussell||Programming||10||23rd January 2009 07:47 AM|
|Project layout, any comments?||PatrickBaer||FreeBSD General||1||12th October 2008 05:13 PM|