|
FreeBSD General Other questions regarding FreeBSD which do not fit in any of the categories below. |
|
Thread Tools | Display Modes |
|
|||
Really poor FileServer
Im so in need of help...
My FreeBSD fileserver has been giving nothing but issues... It seems it doesnt like any drives except old 20gb drives. Mind you managed to get 120Gb working well... All other drives cause issues. Brand new drives, drives thats been in use perfectly within windows.... /dev/ad0s1e on /tmp (ufs, local, soft-updates) /dev/ad0s1f on /usr (ufs, local, soft-updates) /dev/ad0s1d on /var (ufs, local, soft-updates) /dev/ad6s1d on /mnt/750sg (ufs, local, noatime, soft-updates) /dev/aacd0s1d on /mnt/RaidVolume (ufs, local, noatime, soft-updates) /dev/ad2s1d on /mnt/250GbMax (ufs, local, noatime, soft-updates) Thats how its mounted. ad6 gives following issues: Works perectly, under heavy load..... [root@gw2 /mnt/750sg/oldgw/var]# dmesg ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly ad6: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly ad6: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly ad6: WARNING - SET_MULTI taskqueue timeout - completing request directly ad6: TIMEOUT - WRITE_DMA48 retrying (1 retry left) LBA=647220383 ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly ad6: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly ad6: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly ad6: WARNING - SET_MULTI taskqueue timeout - completing request directly ad6: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=939797695 Had issues with /dev/ad2s1d on /mnt/250GbMax (ufs, local, noatime, soft-updates) as well. That drive infact i set down with "atacontrol mode ad2 UDMA66" Even in this slow mode it also gives issues, just less. The only thing i can do is reboot then all works fine... At this stage im considering taking all file server roles off this box as FreeBSD cant handle it. |
|
|