Is powerd really working?
I have boxes with 6.2-x86 to 7.0-amd64 with CPUs from AMD and Intel ranging between Athlon64, Pentium4, Xeon processors.
OK I have setup powerd and when I run powerd I see (for example):
idle time > 90%, decreasing clock speed from 2978 MHz to 2605 MHz
idle time > 90%, decreasing clock speed from 2605 MHz to 2233 MHz
idle time > 90%, decreasing clock speed from 2233 MHz to 1861 MHz
idle time > 90%, decreasing clock speed from 1861 MHz to 1489 MHz
idle time > 90%, decreasing clock speed from 1489 MHz to 1116 MHz
idle time > 90%, decreasing clock speed from 1116 MHz to 744 MHz
idle time > 90%, decreasing clock speed from 744 MHz to 372 MHz
and sysctl's seem to be in order:
dev.cpu.0.freq_levels: 2978/-1 2605/-1 2233/-1 1861/-1 1489/-1 1116/-1 744/-1 372/-1
dev.p4tcc.0.freq_settings: 10000/-1 8750/-1 7500/-1 6250/-1 5000/-1 3750/-1 2500/-1 1250/-1
However, I downloaded acpi_ppc from http://www.spa.is.uec.ac.jp/~nfukuda/software/ and there comes a program called chkfreq with it which measures the cpu time. It always shows the maximum speed. For example 2992751205 for 3ghz P4 (from the above examples) regardless of what freq is set.
OK lets say the chkfreq is faulty, but I tested this on another machine with 6.2 box with:
CPU: AMD Athlon(tm) 64 Processor 3500+ (2202.83-MHz 686-class CPU)
and acpi_ppc says:
cpu0: Px state: P0, 2200MHz, 89000mW, 100us, 7us
cpu0: Px state: P1, 2000MHz, 69000mW, 100us, 7us
cpu0: Px state: P2, 1800MHz, 50000mW, 100us, 7us
cpu0: Px state: P3, 1000MHz, 22000mW, 100us, 7us
cpu0: Px method: AMD K8 Cool'n'Quiet
and when at 1000mhz chkfreq shows 1001297861 when I unload acpi_ppc it shows 2202845489.
Then I load cpufreq and I see:
powernow0: <Cool`n'Quiet K8> on cpu0
and run powerd
dev.cpu.0.freq_levels: 2200/89000 2000/69000 1800/50000 1000/22000
dev.powernow.0.freq_settings: 2200/89000 2000/69000 1800/50000 1000/22000
but when I run chkfreq I get 2202846202 (I checked with -v, powerd does not increase speed while testing)
I tested powerd on several machines with p4, athlon64, xeon processors and it seems to work in none of the machines properly.
Does anybody know how any way to check for sure if powerd is really working or not?
|Thread||Thread Starter||Forum||Replies||Last Post|
|Working with CVS?||Zmyrgel||OpenBSD General||15||6th October 2009 02:32 PM|
|x11 forwarding over ssh not working||kasse||OpenBSD General||14||23rd December 2008 02:21 PM|
|pf: why is that rule not working?||ivanatora||FreeBSD General||14||11th December 2008 09:32 AM|
|USB not working after suspend||stukov||Other BSD and UNIX/UNIX-like||5||11th August 2008 07:48 PM|
|Crontab not working||beandip||FreeBSD General||6||6th August 2008 09:33 PM|