Your OpenBSD Hardware - Page 3

vermaden · #41 **(View Single Post)** 19th April 2010

Quote:

Originally Posted by tetrodozombie

I have 9 gigs of ram in this baby (...) and Dillo as my web browser.

Have You already thought about changing Dillo to something less bloated (as links for example)?

tetrodozombie · #42 **(View Single Post)** 21st April 2010

@Vermaden: Yes. I find _links_ very easy to use, but it's not installed by default like _lynx_ is. I've chosen to install as few programs as possible due to buffer overruns ( memory leaks ) being the greatest source of vulnerability to any system on Mac, Windows, Linux, etc on the web. People should be educated about [ memory leaks ] and the fact that these holes are how hackers get root access.

jggimi · #43 **(View Single Post)** 21st April 2010

But not the only way:

tehsean · #44 **(View Single Post)** 5th October 2010

Dell Zino HD running 4.7/amd64-release

Dell Vostro A90 running 4.6/i386-release

Fujitsu U820 running 4.7/i386-current

rocket357 · #45 **(View Single Post)** 5th October 2010

Sun Ultra5 running OpenBSD-4.7-RELEASE/sparc64

Dell Optiplex GX520 running OpenBSD-4.8-CURRENT/amd64

And another BSD:
Dell Optiplex <some very low-end ancient model> running FreeBSD-8.1-RELEASE/i386

bleakgadfly · #46 **(View Single Post)** 5th October 2010

I run OpenBSD/i386-current on my Lenovo ThinkPad SL510 as a desktop operating system. OpenBSD/i386 4.7 is running on my IBM ThinkCentre which is currently a DHCP server, wireless access point with pf (NAT/firewall/etc).

OpenBSD/loongson-current on a Lemote FuLoong 2F which serves as a NTP server to the pool.ntp.org, and also OpenBSD/loongson-current on a Lemote YeeLoong 8101B which serves as DNS caching server.

I have an old HP NetServer which is currently incomplete but will soon be utilized as a failover firewall with OpenBSD/i386-current.

marcolino · #47 **(View Single Post)** 27th October 2010

Here is the dmesg from a Dell PowerEdge 2450 I set up on our network:

Code:

OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17 20:55:07 MDT 2010
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 928 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 2147049472 (2047MB)
avail mem = 2071560192 (1975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/03/00, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xfa1d0 (51 entries)
bios0: vendor Dell Computer Corporation version "A05" date 08/03/2000
bios0: Dell Computer Corporation PowerEdge 2450
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices DRAC(S5) PCI0(S5) PCI1(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 928 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpiprt2 at acpi0: bus 3 (I960)
acpicpu0 at acpi0
acpicpu1 at acpi0
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0xe00
esm0 at mainbus0
esm0: PowerEdge 2450 Embedded Server Management 5.24
esm0: Primary System Backplane 1.16
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 2
ppb0 at pci1 dev 2 function 0 "Intel i960 RM PCI-PCI" rev 0x02
pci2 at ppb0 bus 3
"Adaptec AIC-7899F" rev 0x01 at pci2 dev 4 function 0 not configured
ahc0 at pci2 dev 4 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3 int 14 (irq 10)
scsibus0 at ahc0: 16 targets, initiator 7
st0 at scsibus0 targ 6 lun 0: <ARCHIVE, Python 06408-XXX, 8071> SCSI3 1/sequential removable
"Dell PERC 3/Si" rev 0x02 at pci1 dev 2 function 1 not configured
fxp0 at pci1 dev 8 function 0 "Intel 8255x" rev 0x08, i82559: apic 3 int 0 (irq 5), address 00:b0:d0:b0:2b:ca
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ppb1 at pci0 dev 2 function 0 "Intel i960 RN PCI-PCI" rev 0x02
pci3 at ppb1 bus 1
ami0 at pci0 dev 2 function 1 "Intel 80960RP ATU" rev 0x02: apic 3 int 4 (irq 11)
ami0: Dell 467, 32b, FW 1.06, BIOS v1p00, 128MB RAM
ami0: 2 channels, 16 targets, 1 logical drives
scsibus1 at ami0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 104034MB, 512 bytes/sec, 213061632 sec total
vga1 at pci0 dev 14 function 0 "ATI Mach64" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x50: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB SDRAM registered ECC PC133CL3
spdmem1 at iic0 addr 0x51: 512MB SDRAM registered ECC PC133CL3
spdmem2 at iic0 addr 0x52: 512MB SDRAM registered ECC PC133CL3
spdmem3 at iic0 addr 0x53: 512MB SDRAM registered ECC PC133CL3
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-224E, 3.7C> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04: apic 2 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

I had to install a supported RAID card from another Dell server to get it installed and running. Currently, I use it as an FTP server for g4u images.

I'm looking for a new server to replace this. It will continue to be an FTP server, but I need to add SMB file server functionality to it. Does anyone have any recommendations?

zizzo · #48 **(View Single Post)** 7th December 2010

Got a couple old mobos running Athlon XP CPUs & 512M + 3Com & Intel NICs

#1 OpenBSD-4.8-CURRENT/i386 on a box w/dual-port intel nic and pf

#2 OpenBSD-4.8-CURRENT/i386 on a box as a backup pf box

#3 OpenBSD-4.8-CURRENT/i386 on a box for pf.conf dev

top shows 98% to 100% idle running a couple of users download iso

$ uptime
8:10PM up 28 days, 21:21, 1 user, load averages: 0.08, 0.08, 0.08

fossala · #49 **(View Single Post)** 25th February 2011

Openbsd -current AMD64.
CPU: Intel Core2Quad Q8200@2.33GHz
MOBO: Asrock G31M-GS
Ram: 4GB DDR2 800MHz
GPU: Nvidia GTS250 1GB

dmesg:

Code:

OpenBSD 4.9 (GENERIC.MP) #0: Thu Feb 24 11:07:29 GMT 2011
    root@Dolphin.my.domain:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3219849216 (3070MB)
avail mem = 3120115712 (2975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfc200 (22 entries)
bios0: vendor American Megatrends Inc. version "P1.60" date 07/08/2009
bios0: ASRock G31M-GS.
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB AAFT GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) PS2M(S4) UAR1(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) HDAC(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2327.82 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2327.50 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,LONG
cpu1: 2MB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2327.50 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,LONG
cpu2: 2MB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2327.50 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,LONG
cpu3: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P0P2)
acpiprt2 at acpi0: bus 3 (P0P1)
acpiprt3 at acpi0: bus 2 (P0P4)
acpiprt4 at acpi0: bus 1 (P0P5)
acpiprt5 at acpi0: bus -1 (P0P6)
acpiprt6 at acpi0: bus -1 (P0P7)
acpiprt7 at acpi0: bus -1 (P0P8)
acpiprt8 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2327 MHz: speeds: 2336, 2003 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x10: apic 4 int 16 (irq 11)
pci1 at ppb0 bus 4
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0615 rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 4 int 16 (irq 11)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 4 int 16 (irq 11)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 4 int 17 (irq 10)
pci3 at ppb2 bus 1
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 4 int 17 (irq 10), address 00:25:22:04:8e:18
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 4 int 23 (irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 4 int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 4 int 18 (irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 4 int 16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 4 int 23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 3
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <SAMSUNG HD502IJ>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 4 int 19 (irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Microsoft Natural\M-. Ergonomic Keyboard 4000" rev 2.00/1.73 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Microsoft Natural\M-. Ergonomic Keyboard 4000" rev 2.00/1.73 addr 2
uhidev1: iclass 3/0, 1 report id
uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0
uhidev2 at uhub2 port 1 configuration 1 interface 0 "HORI CO.,LTD. REAL ARCADE PRO.3" rev 2.00/1.00 addr 2
uhidev2: iclass 3/0
uhid1 at uhidev2: input=64, output=0, feature=8
uhidev3 at uhub2 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/57.01 addr 3
uhidev3: iclass 3/1
ums0 at uhidev3: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev4 at uhub2 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/57.01 addr 3
uhidev4: iclass 3/0, 17 report ids
uhid2 at uhidev4 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev4 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev4 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

CyberJet · #50 **(View Single Post)** 1st July 2011

I'm running OpenBSD 4.9 on Sun SPARCstation5 (SS5), 85 Mhz, 512MB RAM, 2.1 GB HD and ULTRA1, runs a lot faster on ULTRA1 167 MHz, 368 MB RAM, 2.1GB HD.

RalphEllis · #51 **(View Single Post)** 7th May 2012

I am pleased to say that OpenBSD 5.1 has really advanced in its hardware detection. The 4 series OpenBSD would not boot on my Gateway DX4300 and this was a common problem with most Unix based operating systems - FreeBSD, NetBSD and Solaris. Each would either experience a kernel panic or the video would not be able to run. With OpenBSD 5.1 amd64, the system installs, boots, recognizes my scanner, printer and other devices. I am very impressed with the advances.

I have attached the output of the dmeg command.

daemonfowl · #52 **(View Single Post)** 7th May 2012

RalphEllis : I totally agree with you .
Bravo OpenBSD Team and thanks for the priceless gift !

LeFrettchen · #53 **(View Single Post)** 12th August 2012

Compaq Armada E500 P3 700MHz, 128Mb RAM, 10Gb HD, OpenBSD 5.1.

OpenBSD 5.0 recognized my trackpad.
OpenBSD 5.1 don't.

emigrant · #54 **(View Single Post)** 20th August 2012

My home router/server:

Alix 2D3( http://pcengines.ch/alix2d3.htm ) + CF Card + OpenBSD 5.1:

- adsl 6Mb via pseudo-device pppoe0
- pf(altq+hfsc), queueing(hfsc) for 15 hosts and few services
- NAT(plus natpmpd)
- UniFi Controller(running jre 1.7 and mongodb) for few UniFi access points
- Controlling APC Smart 1000VA via com via apcupsd
- EKG on screen
- irssi for IRC on screen
- twirssi( http://twirssi.com ) Twitter via terminal
- Simple stats via ipfm( http://scripfm.sourceforge.net )
- small www server(apache) for few things, next time(OpenBSD 5.2) will be nginx
- ntpd daemon(Alix 2D3 without RTC battery)
- hardware encryption 128bit Cipher aes128-cbc via SoC Geode on Alix
- enable LEDs via gpioctl, LEDs(front panel) blinking right now, looks awesome

5-6watts idle 0dB!

dmesg(OpenBSD 5.1):

Quote:

OpenBSD 5.1-stable (ALIX) #0: Thu Jul 19 09:43:40 CEST 2012
root@xxxxxxxxx:/usr/src/sys/arch/i386/compile/ALIX
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMX X,3DNOW2,3DNOW
real mem = 267976704 (255MB)
avail mem = 253497344 (241MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00:0d:b9:18:c1:50
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0d:b9:18:c1:51
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 15, address 00:0d:b9:18:c1:52
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio
gpio0 at glxpcib0: 32 pins
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFX3-004G>
wd0: 4-sector PIO, LBA, 3919MB, 8027712 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0, legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
mtrr: K6-family MTRR support (2 registers)
nvram: invalid checksum
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (81eaab064a4e09e3.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
WARNING: clock time much less than file system time
WARNING: using file system time
WARNING: CHECK AND RESET THE DATE!

few pix:

daemonfowl · #55 **(View Single Post)** 21st August 2012

Thanks emigrant , for the lovely Puffy pics !
dmesg for Compaq Mini CQ10 - 130se , running OpenBSD current :

Code:

OpenBSD 5.2 (GENERIC.MP) #337: Mon Jul 30 11:41:22 MDT 2012
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
real mem  = 1064562688 (1015MB)
avail mem = 1036288000 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/05/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ 0xfc8c0 (18 entries)
bios0: vendor Hewlett-Packard version "14680 Ver. F.01" date 11/05/2009
bios0: Hewlett-Packard Compaq Mini CQ10-100
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET ASF! SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) LAN2(S3) USB0(S3) USB3(S3) EUSB(S3) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus -1 (P0P7)
acpiprt5 at acpi0: bus -1 (P0P8)
acpiprt6 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpibat0 at acpi0: BAT1 model "Primary" serial   type LION oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: no HD-Audio codecs
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 1
"Broadcom BCM4315" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: msi, address 18:a9:05:e7:76:be
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST96812AS, 3.14> SCSI3 0/direct fixed t10.ATA_ST96812AS_5PJBBELN
sd0: 57231MB, 512 bytes/sector, 117210240 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "importek HP Webcam-50" rev 2.00/37.12 addr 2
video0 at uvideo0
rum0 at uhub0 port 7 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e
ugen0 at uhub4 port 2 "Broadcom Corp HP Bluetooth Module" rev 2.00/3.49 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (83d5443824ae0231.a) swap on sd0b dump on sd0b
uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
ehci_idone: ex=0xd1ec1200 is done!
rum0 detached
rum0 at uhub0 port 7 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
syncing disks... done
OpenBSD 5.2 (GENERIC.MP) #337: Mon Jul 30 11:41:22 MDT 2012
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
real mem  = 1064562688 (1015MB)
avail mem = 1036288000 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/05/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ 0xfc8c0 (18 entries)
bios0: vendor Hewlett-Packard version "14680 Ver. F.01" date 11/05/2009
bios0: Hewlett-Packard Compaq Mini CQ10-100
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET ASF! SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) LAN2(S3) USB0(S3) USB3(S3) EUSB(S3) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus -1 (P0P7)
acpiprt5 at acpi0: bus -1 (P0P8)
acpiprt6 at acpi0: bus -1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpibat0 at acpi0: BAT1 model "Primary" serial   type LION oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: IGD_
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: no HD-Audio codecs
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 1
"Broadcom BCM4315" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: msi, address 18:a9:05:e7:76:be
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST96812AS, 3.14> SCSI3 0/direct fixed t10.ATA_ST96812AS_5PJBBELN
sd0: 57231MB, 512 bytes/sector, 117210240 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "importek HP Webcam-50" rev 2.00/37.12 addr 2
video0 at uvideo0
rum0 at uhub0 port 7 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:19:5b:6c:d2:5e
ugen0 at uhub4 port 2 "Broadcom Corp HP Bluetooth Module" rev 2.00/3.49 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (83d5443824ae0231.a) swap on sd0b dump on sd0b
ugen0 detached
uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x15ca USB Optical Mouse" rev 2.00/5.12 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0

( 2 issues :
no sound
ethernet interface doesn't work )
And yet .. Puffy rocks !! just out of this world !

ticoit · #56 **(View Single Post)** 15th October 2012

Toshiba NB255-N245 netbook

-current @amd64

dmesg:

Code:

OpenBSD 5.2-current (GENERIC.MP) #41: Tue Oct  9 21:14:36 MDT 2012
    deraadt@amd64.openbsd.org:/usr/src/s...ile/GENERIC.MP
real mem = 2135752704 (2036MB)
avail mem = 2056474624 (1961MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdc010 (21 entries)
bios0: vendor TOSHIBA version "V1.60" date 07/30/2010
bios0: TOSHIBA TOSHIBA NB255
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA HPET MCFG SLIC APIC BOOT SSDT SSDT SSDT
acpi0: wakeup devices EXP1(S4) EXP2(S4) PXS3(S4) EXP4(S4) PCIB(S3) USB1(S3) USB2(S0) USB3(S3) USB4(S0) EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 1662.76 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 232MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 2327.50 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu1: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (EXP1)
acpiprt2 at acpi0: bus 7 (EXP2)
acpiprt3 at acpi0: bus 9 (EXP3)
acpiprt4 at acpi0: bus -1 (EXP4)
acpiprt5 at acpi0: bus 17 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "PA3835U-1BRS" serial 41167 type Li-Ion oem "TOSHIBA"
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: IGD0
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
0:29:7: mem address conflict 0xf0504000/0x400
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 5
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 7
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 4c:ed:de:23:6d:ae
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi
pci3 at ppb2 bus 9
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8168E/8111E (0x2c00), apic 2 int 18, address 88:ae:1d:fa:23:d8
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 17
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1252GSX>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 4 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/38.82 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct removable serial.0bda0138516388200000
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Chicony USB 2.0 Camera" rev 2.00/20.56 addr 3
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (fce53dca4beadacf.a) swap on wd0b dump on wd0b

Everthing is fully support, battery lasts forever, no problems whatsoever.

-luis

Celtic · #57 **(View Single Post)** 9th November 2012

I use OpenBSD 5.1, 5.2 and Current on multiple boxes.

In no particular order:

Soekris net5501 and net6501.
HP Proliant MicroServer N40L servers.
HP XW6400 and XW6600 workstations.
HP Proliant DL380 servers.
... and some random HP notebook that I use as a PXE server.

I've sent all the dmesg info to OpenBSD. I can post here if requested.

Trihexagonal · #58 **(View Single Post)** 23rd November 2012

OpenBSD 5.2
Dell Dimension 4600i A12 BIOS
Intel Pentium 4 @ 2.8GHz
3GB DDR SDRAM
80GB Seagate HD
Samsung DVD-ROM SD-616E
NEC DVD+RW ND-3100AD
Razer DeathAdder USB Mouse
Logitech Illuminated USB Keyboard
Intel PRO/100 VE Ethernet
NVIDIA GeForce3

haziz · #59 **(View Single Post)** 10th February 2013

DEC (d|i|g|i|t|a|l) VaxStation 4000 model 90.
VT520 Terminal.
Allied Telesis CentreCom AT-210T (AUI 10base5 to 10baseT [cat5] network adapter/dongle).

My DEC (d|i|g|i|t|a|l) VaxStation 4000 model 90 has a staggering 32 MB of RAM and 4x2.1 GB hardrives! I have one 2.1 GB HD dedicated to OpenBSD 5.2 but am for now keeping 3 installs of VMS on the other 3 HDs until I know what to do with them.

A VT520 terminal is my way of accessing the machine. The machine does have a frame buffer for a monitor but I do not have a monitor that will connect with it (it needs one with BNC connectors and the ability to sync on Green [SOG]).

dmesg:

Code:

OpenBSD 5.2 (GENERIC) #79: Mon Jul 30 21:29:35 MDT 2012
   deraadt@vax.openbsd.org:/usr/src/sys/arch/vax/compile/GENERIC
VAXstation 4000/90 [13003602 04130002]
cpu0: KA49
real mem = 33263616 (31MB)
avail mem = 28655616 (27MB)
mainbus0 at root
vsbus0 at mainbus0
vsbus0: 8K entry DMA SGMAP at PA 0x27000000 (VA 0x865fa000)
vsbus0: interrupt mask 0
ze0 at vsbus0 csr 0x20008000 vec 264 ipl 15 maskbit -1: address 08:00:2b:38:85:a0
dz0 at vsbus0 csr 0x25000000 vec 340 ipl 15 maskbit 3: console, 4 lines
lkkbd0 at dz0 line 0
wskbd0 at lkkbd0
lkms0 at dz0 line 1
wsmouse0 at lkms0
asc0 at vsbus0 csr 0x26000080 vec 328 ipl 15 maskbit 1: NCR53C94, 25MHz
asc0: SCSI bus reset
scsibus0 at asc0: 8 targets, initiator 6
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ28 (C) DEC, 442D> SCSI2 0/direct fixed serial.DEC_RZ28_(C)_DECPCB=ZG52261920_;_HDA=000052457852
sd0: 2007MB, 512 bytes/sector, 4110480 sectors
sd1 at scsibus0 targ 1 lun 0: <DEC, RZ28 (C) DEC, 442D> SCSI2 0/direct fixed serial.DEC_RZ28_(C)_DECPCB=ZG53390162_;_HDA=000053666100
sd1: 2007MB, 512 bytes/sector, 4110480 sectors
sd2 at scsibus0 targ 2 lun 0: <DEC, RZ28 (C) DEC, 442D> SCSI2 0/direct fixed serial.DEC_RZ28_(C)_DECPCB=ZG53494064_;_HDA=000053664542
sd2: 2007MB, 512 bytes/sector, 4110480 sectors
sd3 at scsibus0 targ 3 lun 0: <DEC, RZ28 (C) DEC, 442D> SCSI2 0/direct fixed serial.DEC_RZ28_(C)_DECPCB=ZG53390810_;_HDA=000053460410
sd3: 2007MB, 512 bytes/sector, 4110480 sectors
cd0 at scsibus0 targ 4 lun 0: <DEC, RRD45 (C) DEC, 0436> SCSI2 5/cdrom removable
st0 at scsibus0 targ 5 lun 0: <DEC, TZ85 (C) DEC, 2418> SCSI2 1/sequential removable serial.DEC_TZ85_(C)_DEC??????????ZG22209518
lcspx0 at vsbus0 csr 0x39302000 vec 288 ipl 15 maskbit 2
lcspx0: 1280x1024x8 frame buffer
wsdisplay0 at lcspx0
wsdisplay0: screen 0 added (std, vt100 emulation)
wskbd0: connecting to wsdisplay0
vsaudio0 at vsbus0 csr 0x26800000 vec 344 ipl 15 maskbit 4
audio0 at vsaudio0
led0 at mainbus0
lkkbd0: no keyboard
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: sd3
root on sd3a (11a8c5fca00a018d.a) swap on sd3b dump on sd3b

asemisldkfj · #60 **(View Single Post)** 17th February 2013

That looks awesome, emigrant! I've been looking at those ALIX boards for a firewall on and off for years but have never bought one. Currently using an Intel Atom (truncated dmesg because who needs to know how many USB ports I have):

Code:

OpenBSD 5.2 (GENERIC.MP) #339: Wed Aug  1 10:13:24 MDT 2012
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU D410 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
real mem  = 2128760832 (2030MB)
avail mem = 2083106816 (1986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/31/10, SMBIOS rev. 2.5 @ 0xe4100 (24 entries)
bios0: vendor Intel Corp. version "MOPNV10N.86A.0178.2010.0331.0947" date 03/31/2010
bios0: Intel Corporation D410PT
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D410 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your NetBSD hardware	PhotoJim	NetBSD General	12	5th January 2012 06:37 AM
Your FreeBSD Hardware	FloridaBSD	FreeBSD General	69	4th July 2011 12:41 AM
Hardware recommendation: what hardware to buy for my new FreeBSD desktop?	Broodjegehaktmetmayo	General Hardware	92	11th February 2009 09:43 PM
upgrading/new hardware from 4.0	knasbas	OpenBSD Installation and Upgrading	1	7th January 2009 01:55 AM
What Sun hardware do you have	revzalot	General Hardware	7	22nd August 2008 01:44 PM