HOWTO: reformat a USB flash drive in NetBSD
HOWTO: reformat a USB flash drive in NetBSD
This tutorial will demonstrate how to go about reformatting your USB flash drive. It will particularly show how to reformat it with a NetBSD FFS filesystem, but will work for any filesystem, including back to a MSDOS FAT filesystem.
There are numerous reasons why one would want to do this. One example is that this is a key step in creating a NetBSD system installed onto and from a USB drive and boot from it (although there are a couple more steps involved in preparing the drive, most notably installing and activating the MBR). Another reason is that it offers a layer of security as if someone tried to steal and read your files on a Windows system, they might give up when Windows cannot recognize the file format.
In the same light, do not do this if you need this to work on a Windows system, as Windows does not recognize Unix filesystems natively. Also, be sure to read the manpages for fdisk(8), disklabel(8), and newfs(8).
1.2 Create a new NetBSD partition
The first step is to delete the MSDOS partition and create the new NetBSD partition. The USB drives are usually designated as sd0:
umass0 at uhub6 port 2 configuration 1 interface 0 umass0: SanDisk U3 Cruzer Micro, rev 2.00/2.00, addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 2 luns per target sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer, 8.01> disk removable sd0: 7657 MB, 61260 cyl, 8 head, 32 sec, 512 bytes/sect x 15682559 sectors cd1 at scsibus0 target 0 lun 1: <SanDisk, Cruzer, 8.01> cdrom removable
# fdisk -u /dev/rsd0d Disk: /dev/rsd0d NetBSD disklabel disk geometry: cylinders: 61260, heads: 8, sectors/track: 32 (256 sectors/cylinder) total sectors: 15682559 BIOS disk geometry: cylinders: 976, heads: 255, sectors/track: 63 (16065 sectors/cylinder) total sectors: 15682559 Do you want to change our idea of what BIOS thinks? [n] n Partition table: 0: Primary DOS with 32 bit FAT (sysid 11) start 44, size 15679396 (7656 MB, Cyls 0/0/45-975) PBR is not bootable: All bytes are identical (0x00) 1: <UNUSED> 2: <UNUSED> 3: <UNUSED> No active partition. Which partition do you want to change?: [none] 0 The data for partition 0 is: Primary DOS with 32 bit FAT (sysid 11) start 44, size 15679396 (7656 MB, Cyls 0/0/45-975) PBR is not bootable: All bytes are identical (0x00) sysid: [0..255 default: 11] 169 start: [0..976cyl default: 44, 0cyl, 0MB] [RETURN] size: [0..976cyl default: 15679396, 976cyl, 7656MB] [RETURN] bootmenu:  [RETURN] The bootselect code is not installed, do you want to install it now? [n] n Partition table: 0: NetBSD (sysid 169) start 44, size 15679396 (7656 MB, Cyls 0/0/45-975) PBR is not bootable: All bytes are identical (0x00) 1: <UNUSED> 2: <UNUSED> 3: <UNUSED> No active partition. Which partition do you want to change?: [none] [RETURN] Installed bootfile doesn't support required options. Update the bootcode from /usr/mdec/mbr? [n] [RETURN] We haven't written the MBR back to disk yet. This is your last chance. Partition table: 0: NetBSD (sysid 169) start 44, size 15679396 (7656 MB, Cyls 0/0/45-975) PBR is not bootable: All bytes are identical (0x00) 1: <UNUSED> 2: <UNUSED> 3: <UNUSED> No active partition. Should we write new partition table? [n] y
159 BSDI? 165 FreeBSD or 386BSD or old NetBSD 166 OpenBSD 169 NetBSD 183 BSDI BSD/386 filesystem 184 BSDI BSD/386 swap
1.3 Create the label for the new partition
The next step is to create the disklabel slice(s). The standard partition letter for USB drives is 'e' in NetBSD. (At least my SanDisk Micro's are always 'e'). You can make this any letter from 'a' to 'p', except 'c' or 'd'. If you have another USB drive that you're using another filesystem on (say a MSDOS one for working with Windows machines) it may be helpful to choose another letter.
If you want to delete a partition, just set the filesystem type to unset its start offset and size to 0.
Note: The 'c' (NetBSD partition) and 'd' (whole disk) partitions are needed in NetBSD - don't delete them!
# disklabel -i -I sd0 partition> i Filesystem type [?] [MSDOS]: 4.2BSD Start offset ('x' to start after partition 'x') [0c, 0s, 0M]: [RETURN] Partition size ('$' for all remaining) [61260c, 15682559s, 7657.5M]: $ partition> W Label disk [n]? y Label written partition> Q
1.4 Create a new filesystem on the new partition
This will create and format the new filesystem on the partition created through disklabel.
# newfs /dev/rsd0i
1.5 Modify any necessary system configurations to accomodate the new setup
At this point, you can modify any system settings that you deem necessary. Probable changes will be a new mount point in /mnt, such as /mnt/usb_ffs. You might also want to add a new entry to your /etc/fstab. Such an entry might look like this (I have in another entry for a MSDOS partitioned drive) :
/dev/sd0e /mnt/usb msdos rw,nosuid,nodev,noauto 0 0 /dev/sd0i /mnt/usb_ffs ffs rw,nosuid,nodev,noauto 0 0
And the WORD was made flesh, and dwelt among us. (John 1:14)
|Thread||Thread Starter||Forum||Replies||Last Post|
|System freeze when connecting USB flash drive (4.4 & 4.5 but worked in 4.3)||GardenGnome||OpenBSD Installation and Upgrading||11||7th May 2009 02:32 PM|
|HOWTO: ISO-8859-1 Character Set on NetBSD||JMJ_coder||Guides||0||24th February 2009 11:53 PM|
|Backup to USB flash drive||giga||FreeBSD General||5||8th December 2008 10:06 PM|
|which Flash Drive I must buy for FreeBSD and OpenBSD||mfaridi||General Hardware||18||22nd October 2008 07:43 PM|
|USB flash drive||criglerj||NetBSD General||1||26th July 2008 01:25 AM|