![]() |
|
|||||||
| OpenBSD General Other questions regarding OpenBSD which do not fit in any of the categories below. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
|||
|
I decided ti install OpenBSD 4.7 i386 on a P4/xeon Dell Dimension 3000.
The only modifications I have made to the tower are:removed a 256M stick and added a 1024M stick. I also disconnected the front usb and transferred the card reader from a compaq sr1710nx. I'm using the tower in question right now. |
|
||||
|
Post...your...dmesg....if....you....want....more.. ..than....commiseration.
__________________
OpenBSD LiveCDs/LiveDVDs |
|
|||
|
Quote:
Las particulas resultan, sera paciente. I had to wait for the router, travel to another city to take car of business, come back, wait for UPS, connect the system, have the ISP reset the DHCP address, setup LAN and WLAN, boot, disable acpi, startx, and hard reboot a few times. |
|
|||
|
dmesg 2 after reboot
Code:
OpenBSD 4.7-current (GENERIC) #566: Sun Mar 28 03:35:16 MDT 2010
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 1340112896 (1278MB)
avail mem = 1288212480 (1228MB)
User Kernel Config
UKC> disable acpi
478 acpi0 disabled
UKC> disable apm
358 apm0 disabled
UKC> e\^H \^Hquit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/05/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (59 entries)
bios0: vendor Dell Computer Corporation version "A03" date 01/05/2006
bios0: Dell Computer Corporation Dimension 3000
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeae0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19 (irq 10)
uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1 int 23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
emu0 at pci1 dev 2 function 0 "Creative Labs SoundBlaster Live" rev 0x07: apic 1 int 17 (irq 3)
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci1 dev 2 function 1 not configured
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int 20 (irq 10), address 00:11:11:27:09:e5
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2500JB-00REA0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-1100A, 108B> ATAPI 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8483B, B105> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 int 17 (irq 3)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x53: 256MB DDR SDRAM non-parity PC3200CL3.0
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 1 int 17 (irq 3), ICH5 AC97
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio1 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
The card reader is still disconnected. |
|
|||
|
Code:
OpenBSD 4.7-current (GENERIC) #566: Sun Mar 28 03:35:16 MDT 2010
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 1340112896 (1278MB)
avail mem = 1288212480 (1228MB)
User Kernel Config
UKC> disable acpi
478 acpi0 disabled
UKC> boot
Unknown command, try help
UKC> help
command args description
add dev add a device
base 8|10|16 base on large numbers
change devno|dev change devices
ddb enter ddb
disable attr val|devno|dev disable devices
enable attr val|devno|dev enable devices
exit leave UKC
find devno|dev find devices
help this message
list list configuration
lines [count] number of lines before more
quit leave UKC
show [attr [val]] show attributes (or devices with an attribute)
timezone [mins [dst]] set timezone/dst
verbose toggle verbose booting
? this message
UKC> ahow
Unknown command, try help
UKC> list
0 video* at uvideo* flags 0x0
1 audio* at uaudio*|btsco*|sb0|sb*|gus0|pas0|sp0|ess*|wss0|wss*|ym*|eap*|envy*|eso*|sv*|neo*|cmpci*|clcs*|clct*|auacer*|auglx*|auich*|auixp*|autri*|auvia*|azalia*|fms*|maestro*|esa*|yds*|emu* flags 0x0
2 midi* at umidi*|sb0|sb*|opl*|opl*|opl*|opl*|opl*|ym*|mpu*|mpu*|autri*|eap* flags 0x0
3 midi* at pcppi0 flags 0x0
4 drm* at inteldrm*|radeondrm* flags 0x0
5 inteldrm* at vga0|vga* flags 0x0
6 radeondrm* at vga0|vga* flags 0x0
7 radio* at udsbr*|bktr0|fms* flags 0x0
8 vscsi0 at root flags 0x0
9 softraid0 at root flags 0x0
10 nsphy* at url*|udav*|mos*|axe*|aue*|xe*|ef*|hme*|lii*|bce*|ale*|alc*|age*|jme*|et*|nfe*|stge*|vge*|bnx*|bge*|lge*|nge*|msk*|sk*|ste*|sis*|wb*|tl*|vr*|pcn*|sf*|ti*|gem*|ne0|ne1|ne2|ne*|ne*|ne*|epic*|sm0|sm*|dc*|dc*|re*|re*|rl*|rl*|mtd*|fxp*|fxp*|xl*|xl*|ep0|ep0|ep0|ep*|ep*|ep*|ep*|ep* phy -1 flags 0x0
11 nsphyter* at url*|udav*|mos*|axe*|aue*|xe*|ef*|hme*|lii*|bce*|ale*|alc*|age*|jme*|et*|nfe*|stge*|vge*|bnx*|bge*|lge*|nge*|msk*|sk*|ste*|sis*|wb*|tl*|vr*|pcn*|sf*|ti*|gem*|ne0|ne1|ne2|ne*|ne*|ne*|epic*|sm0|sm*|dc*|dc*|re*|re*|rl*|rl*|mtd*|fxp*|fxp*|xl*|xl*|ep0|ep0|ep0|ep*|ep*|ep*|ep*|ep* phy -1 flags 0x0
--- more --- UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/05/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (59 entries)
bios0: vendor Dell Computer Corporation version "A03" date 01/05/2006
bios0: Dell Computer Corporation Dimension 3000
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeae0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19 (irq 10)
uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1 int 23 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
emu0 at pci1 dev 2 function 0 "Creative Labs SoundBlaster Live" rev 0x07: apic 1 int 17 (irq 3)
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci1 dev 2 function 1 not configured
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int 20 (irq 10), address 00:11:11:27:09:e5
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2500JB-00REA0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-1100A, 108B> ATAPI 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8483B, B105> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 int 17 (irq 3)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x53: 256MB DDR SDRAM non-parity PC3200CL3.0
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 1 int 17 (irq 3), ICH5 AC97
ac97: codec id 0x41445370 (Analog Devices AD1980)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio1 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
|
|
|||
|
This is solved.
|
![]() |
| Tags |
| openbsd, p4, solved |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| openoffice-3.1.1p4 and firefox3.5.6 crashing "on call" | IronForge | OpenBSD Packages and Ports | 0 | 31st December 2009 05:12 AM |
| FreeBSD 6.3 Server Crashing - full /tmp? | cerulean | FreeBSD General | 2 | 11th November 2008 04:39 AM |
| Optimizations for Xeon E5320? | KernelPanic | FreeBSD Installation and Upgrading | 30 | 30th October 2008 07:19 PM |
| Which file system use to share data on Bsd system? | aleunix | Other BSD and UNIX/UNIX-like | 2 | 1st June 2008 04:14 PM |
| FAM keeps crashing with courier-imap | krreagan | FreeBSD General | 0 | 14th May 2008 11:15 PM |