Weird problem mounting RAID partitions
This problem's been bugging me for months, I hope that someone can help me figure out what's going on.
I have a very strange problem mounting *some* partitions from a mirrored RAID array on my home server. The array has 2 disks and 3 partitions, and runs off a 3ware Escalade 7006-2 card (twe driver). When I booted it up the 3ware BIOS screen does show that the array itself is degraded, but fsck has been run against it with no ominous error messages, which I'm using as a basis to think that the two drives just aren't in sync. All the partitions in the array are set to "noauto" in my fstab.
When I boot up the system and try to mount the partitions, I have this weird situation where the first partition mounts fine, but the other two don't. When I try to mount partitions 2 and 3 I get this message:
mount: [device]: Operation not permitted
This happens whether I use sudo in the mount command (which works for partition 1), or if I'm logged in as root. Nothing helpful appears in any of the usual logs (messages, dmesg.today, security, mount.today, etc. so I have nowhere to start in solving this problem.
Has anyone else had this kind of issue before?
|Thread||Thread Starter||Forum||Replies||Last Post|
|Weird time issues||schrodinger||OpenBSD General||7||26th October 2009 03:20 PM|
|Mounting ext2 partitions seems to fail||Sunsawe||FreeBSD Installation and Upgrading||2||17th June 2009 02:38 PM|
|Weird network problem||rex||FreeBSD General||5||16th September 2008 03:05 AM|
|Weird NAT issues||EvanED||FreeBSD General||3||12th July 2008 12:02 AM|
|weird history problem||mmusang||FreeBSD General||2||17th May 2008 08:07 PM|