setting up a proxy server in OpenBSD 4.3
Good day guys...
First of all I'm not expert either in Linux or Unix but I'm curious how things done in this platform so I setup a proxy server in my newly installed OpenBSD 4.3
here is some info in my box:
edited 2 lines at squid.conf
acl our_networks src 172.16.1.0/24
http_access allow our_networks
NOTE: no pf enabled
edited 2 lines in sysctl.conf
If I try to change one of the client pc gateways ip address as 172.16.1.12 and the DNS into "184.108.40.206", I get an error message "The Connection has timed out" ..
In a client PC if I try to ping 220.127.116.11 I received an answer but when I ping 172.16.1.12 I get "REQUEST TIMED OUT".
Any idea or suggestions that can help me is very much highly appreciated..
I strongly recommend reading more on the subject and carefully following a known-good example configuration.
I recall that you need to enable 'pf' and add RDR rules if you want to use Squid as a 'transparent' proxy.
You can use Squid as an 'explicit' proxy (by putting proxy settings in the browser, or using WPAD), with or without enabling pf and ip forwarding.
BTW, looks like a typo, the line in sysctl.conf should be "net.inet.ip.forwarding=1"
|Thread||Thread Starter||Forum||Replies||Last Post|
|Caching-only DNS server on OpenBSD||Oko||OpenBSD General||1||13th September 2009 09:30 PM|
|issues with setting up symon on openbsd||badguy||OpenBSD Security||12||22nd July 2009 03:21 AM|
|ftp-proxy in openbsd||brody||OpenBSD General||2||20th October 2008 05:18 PM|
|Setting up a multi-card serial server||dk_netsvil||General software and network||14||4th October 2008 02:00 PM|
|Server updates through a proxy||crayoxide||FreeBSD Installation and Upgrading||3||24th September 2008 11:40 PM|