|
|
|||||||
| OpenBSD Installation and Upgrading Installing and upgrading OpenBSD. |
 |
|
|
Thread Tools | Display Modes |
|
|
22nd November 2008
|
||||
|
||||
Booting Failed (OpenBSD 4.3, 4.4)
Good day, dear members forum.
From the old disk Samsung had no problems. OpenBSD install and run without problems. I bought a new hard drive WD7500AAKS. I installed OpenBSD on wd2 (hd2, 1). Not loaded. Gives the following error: Code:
probing: pc0 apm mem[638K 1022M a20=on] disk: fd0 hd0+* hd1+* hd2* >> OpenBSD/I386 BOOT 3.02 open(hd2a:/etc/boot.conf): Invalid arguement boot> booting hd2a:/bsd: open hd2a:/bsd: Invalid arguement failed(22). will try /bsd boot> booting hd2a:/bsd: open hd2a:/bsd: Invalid arguement failed(22). will try /bsd Turning timeout off. On the drive, all in order. Record and read data from the NTFS partition. I easily installed Windows on WD7500AAKS. What can I do? Last edited by quanter; 23rd November 2008 at 07:34 PM. 
|
|
22nd November 2008
|
|||
|
|||
|
Well clearly the bootloader is detecting 3 disks, perhaps installing the new one rearranged the ordering.
The error is an indication that the partition, if it even exists, does not have an FFS file system. At this point I can't diagnose the situation... please consider posting the following information in [code][/code] blocks. $ dmesg# fdisk wd0; disklabel wd0# fdisk wd1; disklabel wd1# fdisk wd2; disklabel wd2This of coarse assumes your drives will attach as wd(4)... 
|
|
23rd November 2008
|
||||
|
||||
|
From the bootloader, you can't issue shell commands, but ... you can find out what's on the three hard drives it sees.
boot> ls hd0a:/ boot> ls hd1a:/ boot> ls hd2a:/ Then, once you've figured out which disk to boot from, issue: boot> boot hd_a:/bsd The bootloader will only try to boot from drive #0 unless told otherwise.
__________________
OpenBSD LiveCDs/LiveDVDs
|
|
23rd November 2008
|
||||
|
||||
|
BSDfan666,
Quote:
Code:
$ dmesg
OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.81 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD errata 89, 104 present, BIOS upgrade may be required
real mem = 1073246208 (1023MB)
avail mem = 1029353472 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/17/05, BIOS32 rev. 0 @ 0xfa780, SMBIOS rev. 2.2 @ 0xf0000 (42 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 02/17/2005
bios0: http://www.abit.com.tw/ AN8 Series(NF-CK804)
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcc34
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcb20/256 (14 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 15 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 4 5 7 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xcc00
cpu0 at mainbus0
cpu0: Cool'n'Quiet K8 1809 MHz: speeds: 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC3200CL3.0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 5, version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.07> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG SP1614C>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG SP2504C>
wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide2: using irq 11 for native-PCI interrupt
wd2 at pciide2 channel 0 drive 0: <WDC WD7500AAKS-00RBA0>
wd2: 16-sector PIO, LBA48, 715404MB, 1465149168 sectors
wd2(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
"TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 7 function 0 not configured
emu0 at pci1 dev 8 function 0 "Creative Labs SoundBlaster Audigy 2" rev 0x00: irq 7
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at emu0
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 4, address 00:50:8d:d3:57:91
ciphy0 at nfe0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 3
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 8600 GT" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
drm at vga1 unsupported
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
wbsio0 port 0x290/2 not configured
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
biomask ef6d netmask ef7d ttymask ff7f
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
ugen0 at uhub1 port 3 "APC Back-UPS ES 700 FW:829.D2 .I USB FW:D2" rev 1.10/1.06 addr 2
softraid0 at root
root on wd1a swap on wd1b dump on wd1b
Code:
# fdisk wd0
Disk: wd0 geometry: 19457/255/63 [312581808 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
*0: 07 0 1 1 - 3501 254 63 [ 63: 56259567 ] HPFS/QNX/AUX
1: 05 3502 0 1 - 19456 254 63 [ 56259630: 256317075 ] Extended DOS
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Offset: 56259630 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 83 3502 2 1 - 4818 254 63 [ 56259756: 21157479 ] Linux files*
1: 05 4819 0 1 - 4949 254 63 [ 77417235: 2104515 ] Extended DOS
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Offset: 77417235 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 82 4819 1 1 - 4949 254 63 [ 77417298: 2104452 ] Linux swap
1: 05 4950 0 1 - 19456 254 63 [ 79521750: 233054955 ] Extended DOS
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Offset: 79521750 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 07 4950 1 1 - 19456 254 63 [ 79521813: 233054892 ] HPFS/QNX/AUX
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Code:
# disklabel wd0 # /dev/rwd0c: type: ESDI disk: ESDI/IDE disk label: SAMSUNG SP1614C flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 19457 total sectors: 312581808 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] c: 312581808 0 unused 0 0 i: 56259567 63 NTFS j: 21157479 56259756 ext2fs k: 2104452 77417298 unknown l: 233054892 79521813 NTFS Code:
# fdisk wd1
Disk: wd1 geometry: 30401/255/63 [488397168 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: A6 0 1 1 - 1313 254 63 [ 63: 21109347 ] OpenBSD
1: A5 1314 0 1 - 2627 254 63 [ 21109410: 21109410 ] FreeBSD
*2: BF 2628 0 1 - 3940 254 63 [ 42218820: 21093345 ] Solaris
3: 05 3941 0 1 - 30400 254 63 [ 63312165: 425079900 ] Extended DOS
Offset: 63312165 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 07 3941 1 1 - 23560 254 63 [ 63312228: 315195237 ] HPFS/QNX/AUX
1: 05 23561 0 1 - 28137 254 63 [ 378507465: 73529505 ] Extended DOS
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Offset: 378507465 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 07 23561 1 1 - 28137 254 63 [ 378507528: 73529442 ] HPFS/QNX/AUX
1: 05 28138 0 1 - 30400 254 63 [ 452036970: 36355095 ] Extended DOS
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Offset: 452036970 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 83 28138 1 1 - 30400 254 63 [ 452037033: 36355032 ] Linux files*
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Code:
# disklabel wd1 # /dev/rwd1c: type: ESDI disk: ESDI/IDE disk label: SAMSUNG SP2504C flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 30401 total sectors: 488397168 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] a: 321237 63 4.2BSD 2048 16384 1 b: 626535 321300 swap c: 488397168 0 unused 0 0 d: 257040 947835 4.2BSD 2048 16384 1 e: 176715 1204875 4.2BSD 2048 16384 1 g: 10490445 1381590 4.2BSD 2048 16384 1 h: 6297480 11872035 4.2BSD 2048 16384 1 i: 21109410 21109410 unknown j: 21093345 42218820 unknown k: 315195237 63312228 NTFS l: 73529442 378507528 NTFS m: 36355032 452037033 ext2fs Code:
# fdisk wd2
Disk: wd2 geometry: 91201/255/63 [1465149168 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
*0: 07 0 1 1 - 1960 254 63 [ 63: 31503402 ] HPFS/QNX/AUX
1: A6 1961 0 1 - 3268 254 63 [ 31503465: 21013020 ] OpenBSD
2: 83 3269 0 1 - 4576 254 63 [ 52516485: 21013020 ] Linux files*
3: 05 4577 0 63 - 91200 254 63 [ 73529567: 1391614498 ] Extended DOS
Offset: 73529567 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 07 4577 1 1 - 91200 254 63 [ 73529568: 1391614497 ] HPFS/QNX/AUX
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
Code:
# disklabel wd2 # /dev/rwd2c: type: ESDI disk: ESDI/IDE disk label: WDC WD7500AAKS-0 flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 91201 total sectors: 1465149168 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # microseconds track-to-track seek: 0 # microseconds drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] a: 321300 31503465 4.2BSD 2048 16384 1 b: 626535 31824765 swap c: 1465149168 0 unused 0 0 d: 257040 32451300 4.2BSD 2048 16384 1 e: 176715 32708340 4.2BSD 2048 16384 1 f: 10490445 32885055 4.2BSD 2048 16384 1 h: 6297480 43375500 4.2BSD 2048 16384 1 i: 31503402 63 NTFS j: 21013020 52516485 ext2fs k: 1391614497 73529568 NTFS Recently, I installed OpenBSD 4.4 on the two discs independently (wd1, wd2). I would like the system works (boot) with wd2.
|
|
23rd November 2008
|
|||
|
|||
|
I don't deal with multiboot environments myself, kinda OpenBSD exclusive, but perhaps you need to flag partition #1 as active on wd2.
|
|
27th November 2008
|
||||
|
||||
|
I decided problem. I need install OpenBSD in FIRST partition on wd2. Now OpenBSD booting without without any problems.
OpenBSD, perhaps, doesn't boot with subsequent partitons, as is the case with my WD7500AAKS (size of first partition is 15Gb).
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Booting netBSD 5 install failed | dk_zero-cool | NetBSD Installation and Upgrading | 10 | 5th May 2009 12:23 PM |
| booting vista installer dvd | bsdnewbie999 | Other OS | 9 | 15th October 2008 06:16 PM |
| different booting bsd.rd & bsd | Hihihi | OpenBSD General | 3 | 15th July 2008 10:34 PM |
| Intermitant fault upon booting | Johnny2Bad | FreeBSD Installation and Upgrading | 7 | 17th May 2008 07:43 PM |
| Booting with external USB drive plugged in? | Bruco | FreeBSD General | 29 | 17th May 2008 05:39 PM |
Hybrid Mode
